Get more sand and less wastage with the CSP 120 Hydrocyclone sand plant. The single grade CSP 120 is designed to get the maximum amount of desired in-spec sand from your screen with little wastage going into ponds.
The CSP120 also has a built in dewatering screen that removes any extra silt and produces a sand product ready to sell as soon as it hits the conveyor.Get an Information Pack
Hydrocyclone sand plants produce accurate separation of silts and clay from the washed sand product and can be run at full capacity without any loss in efficiency unlike sand screws.
The CSP 120 has wide walkways along the side and rear of the screen and cyclone allowing easy monitoring of the plant and particularly the underflow. This allow operators to safely view areas of the machine and make adjustments without leaning over areas to see components and production.
This plant is quick and easy to setup, needing less than a day to install and start production of sands. Due to its simple design and transportable dimensions this can be used by the sand production company that needs the ability to relocate.
Large galvanised walkways make it easy to walk around the plant, monitor outputs and most importantly access and monitor the cyclone from the rear, allowing the operator to monitor output product ensuring no loss of sand.
The CSP range uses advanced, industry leading wear liners from Linatex, allowing for extremely long wear life before replacement.
Polyurethane screen modules are designed for sand production. With upto 10x more wear life than coated wire mesh it also benefits from using the pin and wedge system to further speed up mesh changes.
All critical areas are rubber lined to prevent and reduce wear on sensitive areas.
The PLC unit can be linked up with other compatible MWS hardware for easy control of pumping, screening, stacking hardware in addition to it's own.
|Engine||Three phase connection - 44 kW|
|Pump||Warman - 30 kW|
|Throughput capacity||120 tph|
|Avg. Water Requirement||300 m3/h|
|Media||Polyurethane with Pin and Wedge|
The boiler box allows for dry sand grade feed to be fed into the washing plant instead of a washing screen providing water and screened feed.
Control other electrical equipment and have a singular control panel for management.
Add additional washing to product with spray bars, useful for exceptionally silty product.